Evil Pimp Ram Adjustment Screw

The Evil Pimp's Punch Ram came with a vented nylon adjustment screw. This was a great idea - the nylon acted as the adjuster and the shock absorption polymer. There's just one problem - putting a threadlocker on nylon screws means they pretty much always strip out in the Allen key hole.

If you own a Pimp and have run into this issue, my recommendation is to find a flathead screwdriver that is a bit smaller than the diameter of the ram adjustment hole, drive it into that nylon screw with a hammer, and remove it and throw it away. Cool idea, but not great for longevity.

Then, replace it with this steel adjustment screw and o-ring bumper. Use a little light or medium strength threadlocker during installation, and place the o-ring inside the ram cap between the screw and the ram itself.