Gen 1-3 Ram by System X NOS
Gen 1-3 Ram by System X NOS
Share
These rams were manufactured by System X for the NME around 2003, which was widely seen as an Intimidator clone. They are new old stock (NOS), and are unused, but may have some light scuffs from storage. Each will come with a bumper and two new uninstalled o-rings that are not lubed, so that you can use your favorite grease for installation.
These are 1mm longer than the Bob Long ram from where the bolt pin mates to the ram to the tip where it engages the poppet. Using this with a stock poppet will result in slightly increased mechanical dwell time.
System X incorporated a unique bumper system into these rams that just barely sticks out past the back of the ram. These work well with any Gen 1 and 2 ram cap, adjustable or not, and the Bob Long Gen 3 adjustable ram caps. They will not work well with ram caps designed to rely on the o-ring that goes on the spike of the Gen 3 ram as a bumper; namely, the stock Gen 3 ram cap, New Designz Gen 3 adjustable ram cap, and the CP Gen 3 adjustable ram cap.