Gen 3 / 4 Intimidator Frame Window

This is a small acrylic window that replaces the original in Gen 3 and Gen 4 (2k5 and 2k6) Intimidators. These are cut with a small desktop CNC router. The edges are a little rough, but they aren't seen from the outside of the marker - just the crystal-clear acrylic.

These must be installed using a few small dabs of cyanoacrylate glue (superglue). Gel-type superglue works great, and can be cleaned up later with acetone and a cotton swab if necessary without hurting the anodizing of the frame. Just be careful not to hit the acrylic with acetone!