Gen 3 and Gen 4 (2k5 and 2k6) Intimidator Main Harness

If you have been looking for a main harness that will take abuse without leaving you stranded on the side of the field desperately trying to figure out how to jump-start your board, look no further.

This harness has mil-spec PTFE-jacketed wiring going into the Molex-branded terminals and connectors, which is then soldered to the PVC-jacketed 9V crimp terminal. This prevents the weaker PVC jacket from having a strain break at the Molex connector, which is the most common failure of these main harnesses. 

The PTFE jacket is very resilient compared to PVC. This harness won't break unless you are really, really mean to it.

This harness will work with Gen 3 and Gen 4 boards, and of course the popular Sci-Fi and Flory boards. The conductors are the same wire gauge as stock, but they meet higher standards than OEM and will take more of a beating before finally succumbing to your abuse.